RINGER VOLUME SWITCH
HANDSET
CRADLE
HANDSET CORD
CRADLE CORD (to TEL jack)
CRADLE CONNECTOR
SAMSUNG ELECTRONICS CO., LTD
3
1-1-3 Attach the Cradle
This step must be performed from the bottom of your SF 2200. Carefully turn your SF220 over, and
position it with the front of the unit toward you and the phone connections to your right.
1. Locate the set of clips on the right, just above the rubber foot pad. Insert the narrow end of the Cradle
Connector ( the end with just one tab ) into the clips as shown, so that the raised bump on the tab
engages into place.
2. Run the Cradle Cord that protrudes from the hole in the bottom. Run the Cradle Cord through the
Cradle bottom. Run the Cradle cord through the Cradle Connector guide. Insert the plug end firmly
into the TEL jack on the Main Body.
3. Slip the clips on the Cradle bottom onto the other end of the Cradle Connector, making sure the
raised bumps on the two tabs engage into place.
4. Turn your SF 2200 right-side-up. Connect one end of the coiled Handset cord to the Cradle and the
other end to the Handset, and seat the Handset in the Cradle.
1-1-4 Adjust the Ringer Volume
The small switch on the Cradle lets you adjust the ringer Volume to three different settings. Try all three
to see which volume level is best for you.