Samsung SF2200 Operator'S Manual Download Page 42

Page: 42 / 46

4 0

SAMSUNG ELECTRONICS CO., LTD

Error Message

POLL CODE ERROR

POLLING ERROR

COMM. ERROR

NO ANSWER

LINE ERROR

NO PAPER

DOCUMENT JAM

COVER OPEN

NO.NOT ASSIGNED

LOAD DOCUMENT

OVERHEAT

D e s c r i p t i o n

In trying to poll another fax machine, you are
using an incorrect poll code.

The fax machine you are attempting to poll is
not ready to respond to your poll.

A send or receive has failed due to a
communications problem.

The machine you tried to call does not answer.

Your SF 2200 cannot connect with the remote
machine, or has lost contact because of a
problem on the phone line.

SF 2200 is out of fax paper.

Loaded document has jammed in the feeder.

SF 2200 Cover is not securely latched.

The One-Touch or Speed Dial location you
tried or use has no umber assigned to it.

You have attempted to set up s sending
operation with on document loaded.

SF 2200 has overheated, possibly as a result of
receiving several nearly all-bland faxes.

S o l u t i o n

Check your records of poll codes, or call the remote
operator and request the code.

Call the remote operator.

Try again.

Try again. If failure persists, wait an hour or so for
the line to clear, then try again.

Load paper (page 10).

Clear jam (page 19).

Press down on Cover until you feel it latch securely.

Dial the number manually with the Key Pad, or
assign a number (page 21).

load a document (page 17).

SF 2200 will automatically return to standby mode
when it cools down to normal operating temperature.

5-2 When Service Is Needed

If your problem persists, contact the dealer from whom you purchased your machine. You may want to
jot down your dealer’s telephone number.

Service Telephone Number.

For the most efficient service, jot down the information requested below before calling:

Model NO. of your machine : SF 2200

Serial No.(on bottom of unit):

Type of telephone jack:

Model and brand of facsimile machine are you trying to communicate with:

Is your SF 2200 having a problem transmitting, receiving, of both?

YES/NO

Dose the same problem occur when you call a different machine?

YES/NO

Summary of Contents for SF2200















































Search results

Summary of Contents for SF2200

Reviews:

Related manuals for SF2200

Brands by name

Popular brands

Samsung SF2200, Operator'S Manual

Search results

Summary of Contents for SF2200

Reviews:

Related manuals for SF2200

Brands by name

Popular brands