SF 2200
TAD JACK
ANSWERING MACHINE (TAD)
LINE JACK
WALL JACK
1 0
SAMSUNG ELECTRONICS CO., LTD
1-6 Important Setup Facts
1-6-1 Clearing Paper Jams
CAUTION! If the fax paper jams, DO NOT pull it out. Doing so could damage your fax unit.
To properly clear a fax paper jam :
1. Open the Cover by pulling up on the cover Release.
2. Remove the fax paper.
3. If the paper is wrapped around the black roller, you can remove it by using the STOP and START
keys. Press and hold the STOP or START key and rotate the roller clockwise or counterclockwise until
the tension on the paper loosens. Them remove the paper.
4. Re-load the paper as described on page 10.
If fax paper jams are occurring, the paper may be sticking to the feed roller and wrapping around it.
To prevent further jamming, clean the roller.
1. Turn the power switch off.
2. Open the Cover.
3. Dampen a lint-free cloth with water or isopropyl alcohol and wipe the roller clean.
1-6-2 Answering Machine Setup
To use your SF 2200 with a telephone answering device (TAD), follow these steps:
• Connect the phone line to the LINE jack on your SF 2200.
• Connect the line from your answering machine to the TAD jack on your SF2200.
• Set the mode to ANS/FAX in the User Options (page 24).
To learn how your SF 2200 will operate with your TAD, see page 15.