1 8
SAMSUNG ELECTRONICS CO., LTD
3-1-1 One-Touch and Speed Dialing
You can program up to 100 telephone numbers into your SF 2200 for quick dialing with One-Touch keys
and Speed Dialing. For instructions on storing numbers, see page 21.
To use these numbers to send, load the document as you normally would, then:
• To dial a number that has been assigned to a One-Touch Key. press the Key.
• To dial a number that has been assigned to a Speed Dial number (11 through 99, and 00), press SPEED
DIAL and then use the Key Pad to enter the two-digit number.
3-1-2 Handset Up, Handset Down
You can use any dialing method- manual, One-Touch, or Speed Dial - for manual faxing (handset up) or
automatic faxing (handset down).
To dial manually with the handset down, press HOOK/HOLD first. You will hear a dial tone and you
can then dial manually using the key Pad.
Leave the handset down when you think you are dialing an automatic fax machine and don’t expect an
operator to answer. If an operator does answer, a fax tone will inform the operator that a fax is coming
in.
If you do lift the handset to dial, be sure not to hang up until the transmission begins. Hanging up
before the send begins will disconnect the line and cancel the transmission.
3-1 important Sending Facts
To cancel a send at any time, press STOP.
Your SF 2200 accepts original documents no smaller than 6 inches wide by 3 inches long, and no larger
than 8.5 inches wide. (Length can be almost unlimited, as long as the document continues to feed
smoothly into the machine.) Do not feed more than 10 pages at once. If your document is longer than
that, add batches to the stack as pages are fed through.
1. Adjust the document guide to match the width of the document.
2. Insert the document face down into the loading slot as shown. The SF 2200 will grip the document is
now loaded and ready to send.
3. Pick up the handset and use the key Pad to dial the number of the fax machine you want to send to.
( You can also use One-Touch or Speed Dial numbers for this step. See page 21.) When the line is
answered:
• If you hear a fax tone, press START/COPY and hang up. The SF 22000 starts sending.
• If you hear a voice, instruct the answerer to press START.When you hear a tone, press START/COPY and hang
up.
• If you hear a busy signal, hang up the handset. You can retry later. For automatic redialing, see page 18.
When the last page has been sent, a one- second beep sounds, and the SF 2200 hangs up.
