51
•
If VoiceSignal recognizes the name you said, the contact information for that
name appears in the display.
•
If VoiceSignal does not recognize the name you said, a choice list of up to three
names appears in the display, and VoiceSignal prompts you with “
Did you
say?
” followed by the first name on the list.
4.
Say “
Yes
” to confirm the name or “
No
” to hear the next name, or use the
keypad to select the correct name from the list. (See See
“Choice Lists”
on
page 91, for more information.)
•
To say the name again, press the
Repeat
(right) soft (
) key.
•
To exit VoiceSignal without dialing, press the
Settings
(left) soft (
) key and
press the
Exit
(right) soft (
).
5.
The contact information for the name you selected appears in the display.
•
Press
to dial the number associated with the name.
•
Press the
Erase
(left) soft key (
) to erase this entry from your Contacts list.
•
Press the
EDIT
key (
) to add or change information for this entry.
•
Press the
Options
(right) soft key (
) and the following options popup in the
display:
–
New Contact
–
Erase
–
Send Txt Msg
–
Send Pic Msg
–
Call
–
Send Name Card With Bluetooth
Shortcut Key Method
If you’ve stored a name entry in Contacts,
Find
allows you to find it quickly.
1.
In standby mode, press the
Contacts
shortcut (Up Navigation) key.
The
Find
screen appears in the display with the
Go To
field highlighted,
followed by the first few names in your Contacts list.
Tip:
You can also access the
Find
screen from standby mode by pressing the
MENU
(left) soft key (
),
then pressing
(for
Contacts
) and
for
Find
.
2.
Enter a name
as entered in Contacts
. For example, if you saved the name
as “Amy Smith”, begin the search by pressing
(for “
A
”).
As you enter letters, the names of the closest matches appear in the
display.
3.
When the desired entry is listed in the display, use the Up/Down navigation
keys to highlight the entry.
OK
