89
Section 10: Voice SVC
Topics Covered
• Voice SVC Options
• Voice Command
• Voice Settings
This section explains how you can use and customize your phone’s VoiceSignal
voice recognition feature.
Note:
Although the procedures in this section are written for the phone keypad, you can also perform these
procedures using the QWERTY keypad.
Voice SVC Options
Your SCH-r410 includes VoiceSignal, state-of-the-art voice recognition software that
lets you use your voice to dial numbers, access your Contacts list, and open Tools. To
access your phone’s voice recognition, do the following:
1.
In standby mode, press the
MENU
(left) soft key (
), then press
for
Voice SVC
. The following options appear in the display:
• Voice Command
— Lets you place calls, access your Contacts List, review
your appointments, and more by speaking commands into your phone. Also see
"Voice Dialing"
on page 24. and
“Voice Method”
on page 50 for more
information.
• Voice Settings
— Lets you tailor VoiceSignal to better respond to your voice
and your phone use preferences. See
“Digit Dialing”
on page 91 for more
information.
2.
Use the Up/Down navigation keys to highlight the desired sub-menu, then
press
the
key
.
OK
