Samsung SC-D263, Service Manual

Page: 163 / 244

Operating Instructions
11-41
Samsung Electronics
ENGLISH
89 89
USB Interface (SC-D362/D363/D364/D365/ D366 only)
Transferring a Digital Image through a USB Connection
The Camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification)
You can transfer a recorded file in
M emory Card to a PC via a USB connection. (SC-D363/D364/D365/ D366 only)
If you transfer data to a PC, you need to install the software (DV Driver, Video Codec, DirectX 9.0) supplied with the Camcorder.
USB Connection Speed depending on the System
High speed USB connection is supported by Microsoft (Windows) device drivers only.
Windows 98SE/ME - Full Speed USB
Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.
Windows XP - High speed USB on a system with Service Pack 1 or later installed.
System Requirements
It is not available for Macintosh systems.
[ Notes ]
USB 2.0 works for removable disk and USB streaming functions.
On a slower PC than recommended, movie playback may not be smooth or video editing may take a long time.
On a slower PC than recommended, movie playback may skip frames or operate unexpectedly.
Intel
¤ Pentium III“ or Pentium 4“ is a trademark of the Intel Corporation.
Windows ¤ is a registered trademark of the Microsoft ¤ Corporation.
All other brands and names are property of their respective owners.
Operations are not guaranteed for all of the recommended computer environments mentioned above.
Do not connect the Camcorder to a PC using both DV and USB cables. It may not operate properly.
In <M.Cam> or <M.Player> mode, be sure that the Memory Card is inserted into Camcorder before connecting USB cable. If no Memory Card
or an unformatted Memory Card is inserted, PC will not recognize your Camcorder as a removable disk.
(SC-D363/D364/D365/
D366 only)
USB Streaming requires Video Codec, DV Driver and DirectX 9.0.
If you disconnect the USB cable from the PC or the Camcorder during the data transfer, the data transfer will stop and the data may be
damaged.
If you connect the USB cable to a PC using a USB HUB or with other devices at the same time, it may cause conflict and may not work properly.
If this occurs, remove all other USB devices and try the connection again.
CPU Intel ¤ Pentium III“, 600MHz Intel ¤ Pentium 4“ , 2GHz
OS(Operating System) Windows
¤
98SE/ME Windows
¤
2000/XP
Memory 128MB 512MB
HDD capacity 1GB or more 2GB or more
Resolution 1024 x 768 dots 24bit Color 1024 x 768 dots 24bit Color
USB USB1.1 USB2.0 High Speed
Windows System
Minimum Recommended
Using USB Interface (SC-D362/D363/D364/D365/D366 only)
ENGLISH
90 90
USB Connect function works only in <M.Player> mode. page 19
Using the USB cable, you can connect your Camcorder to a computer to copy your moving images and
photo images
from the Memory Card (or built-in memory; SC-D364/ D366 ), or to a printer to print your images.
1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [MEMORY CARD].
3. Press the [MENU] button.
The menu list will appear.
4. Move the [Zoom] lever to the up or down to select <System>, then press the [OK]
button .
5. Move the [Zoom] lever to the up or down to select <USB Connect>, then press the
[OK] button .
6. Move the [Zoom] lever to the up or down to select <Computer> or <Printer>,
then press the [OK] button .
You can select <Computer> to use the Camcorder as a PC Camera, USB Stream or
removable disk.
You can select <Printer> to use the Pictbridge feature. page 84
7. To exit, press the [MENU] button.
USB Interface (SC-D362/D363/D364/D365/ D366 only)
Selecting the USB Device (USB Connect) (SC- D362 /D363/D364/D365/ D366 only)
PLAYE
R
CA
M
ER
A
CA M
ER
A
PLAY
ER
1
M.Player Mode
System
Clock Set
Remote
Beep Sound
USB Connect
Language
On
On
Computer
English
Move Select Exit
MENU OK ZOOM
Move Select Exit MENU OK ZOOM
Computer
Printer
M.Player Mode
Back
Clock Set
Remote
Beep Sound
USB Connect
Language
4
6
2/46
2/46