Samsung SC-D263, Service Manual

Page: 155 / 244

Operating Instructions
11-33
Samsung Electronics
ENGLISH
73 73
Digital Still Camera Mode (SC-D363/D364/D365/ D366 only)
Taking a Photo Image (JPEG) on the Memory Card
You may take photo images while in <M.Cam> mode and store the images on the Memory Card. page 19
You can take photo images using the remote control.(SC-D364/ D366 only)
Audio will not be recorded with a photo image on to the Memory Card.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [MEMORY CARD].
3. After framing your object to record, fully press the [PHOTO] button to take the picture.
The picture is taken and saved into the Memory Card within a few seconds.
Taking another picture within this interval is not possible.
The <
> indicator appears during the time it takes to save the image.
[ Notes ]
Photo images are saved in the Memory Card in an 800x600 format.
The number of photo images that can be stored depends on the quality of the image.
CA M
ER
A
PLAY
ER
R
A
OK
1
3
1min
46
ENGLISH
74 74
Digital Still Camera Mode (SC-D363/D364/D365/ D366 only)
Viewing Photo Images (JPEG)
This function works only in <M.Player> mode. page 19
You can playback and view
photo images recorded on the Memory Card.
Be sure that the <M.Play Select> is set to <Photo> in the Menu. page 80
1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [MEMORY CARD].
The last recorded image appears. If there are no recorded images on the Memory Card, <No image!> is displayed.
To view a Single Image
Using the [
ÏÏ
/ (REV/FWD)] buttons, search for the desired photo image.
To view the next image: press the [ (FWD)] button.
To view the previous image: press the [
ÏÏ
(REV)] button.
Keep pressing [ (FWD)] or [
ÏÏ
(REV)] to search for an image quickly.
To view a Slide Show
Press the [ / (S.SHOW)] button.
All images will be played back consecutively for 2~3 seconds each.
The <Slide> is displayed. The Slide Show will start from the current picture.
To stop the slide show, press the [ / (S.SHOW)] button again.
To view the Multi Display
To view six stored images on single screen, press the [ (MULTI DISP.)] button.
A selection mark [
ÏÏ
] appears under the image.
Press the [
ÏÏ
/ (REV/FWD)] button to select an image.
To return to single playback mode, press the [ (MULTI DISP.)] button again.
Selected picture is displayed in full screen.
[ Notes ]
Any large sized image taken with another device will be displayed as a thumbnail image.
To display the previous six images, press and hold the [
ÏÏ
(REV)] button for about 3 seconds.
To display the next six images, press the [ (FWD)] button for about 3 seconds.
In order to use <Delete>, <Delete All> , <Protect> or <Print Mark> functions in Multi Display view mode, is available
simply using the [QUICK MENU] button.
REV FWD S.SHOW MULTI DISP.
2/46 Slide
800x600
100-0002
Ï
7/25
ÏÏ
100-0007