Samsung SC-D263, Service Manual

Page: 141 / 244

Operating Instructions
11-19
Samsung Electronics
ENGLISH
45 45
The WindCut Plus function works in both <Camera> and <Player> (Audio dubbing) modes. page 19
Use the WindCut Plus when recording in windy places such as the beach or near buildings.
The WindCut Plus function minimizes wind noise or other noise while recording.
- When the windcut plus is on, some low pitched tones are eliminated along with the sound of the wind.
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE]. (SC-D363/D364/D365 only)
3. Press the [MENU] button.
4. Move the [Zoom] lever to the up or down to select <Record>, then press the [OK]
button .
5. Move the [Zoom] lever to the up or down to select < WindCut Plus >, then press the
[OK] button.
6. To activate the WindCut Plus function, move the [Zoom] lever to the up or down to select
<On> or <Auto> then press the [OK] button .
<On>: It removes the low pitched wind noise.
<Auto>: It minimizes the wind noise while preserving the human voice.
7. To exit, press the [MENU] button.
WindCut Plus ( or ) icon is displayed.
[ Notes ]
Make sure WindCut Plus is set to off when you want the microphone to be as sensitive
as possible.
WindCut Plus function is not available in USB Streaming mode.
(SC-D362/D363/D364/D365/D366 only)
Advanced Recording
Cutting Off Wind Noise ( WindCut Plus )
Move Select Exit MENU OK ZOOM
Camera Mode
Record
Rec Mode
Audio Mode
WindCut Plus
Real Stereo
SP
12Bit
Auto
Off
Move Select Exit MENU OK ZOOM
Off
On
Auto
4
6
60min
0:00:10
SP
STBY
7
Ï
Camera Mode
Back
Rec Mode
Audio Mode
WindCut Plus
Real Stereo
The Real Stereo function works only in <Camera> mode. page 19
Real Stereo is the stereo-fortifying function by enhancing the characteristics of left and
right input signals with internal MIC and External MIC.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE]. (SC-D363/D364/D365/D366 only)
3. Press the [MENU] button.
4. Move the [Zoom] lever to the up or down to select <Record>, then press the [OK]
button.
5. Move the [Zoom] lever to the up or down to select <Real Stereo>, then press the [OK]
button.
6. To activate the Real Stereo function, move the [Zoom] lever to the up or down to select
<On>, then press the [OK] button.
7. To exit, press the [MENU] button.
Real Stereo ( ) icon is displayed.
[ Note ]
To enjoy more stereo sound, use the stereo type speakers.
S
Advanced Recording
Selecting the Real Stereo
ENGLISH
46 46
Move Select Exit MENU OK ZOOM
Camera Mode
Record
Rec Mode
Audio Mode
WindCut Plus
Real Stereo
SP
12Bit
Auto
Off
Move Select Exit
MENU OK ZOOM
Off
On
4
6
CA M
ER
A
PLAY
ER
1
7
60min
0:00:10 SP STBY Ï
S
Camera Mode
Back
Rec Mode
Audio Mode
WindCut Plus
Real Stereo