Samsung SC-D263, Service Manual

Page: 140 / 244

Operating Instructions
11-18
Samsung Electronics
ENGLISH
43 43
Basic Recording
Using the LIGHT (SC-D362/D364/D365/ D366 only)
LIGHT function works only in <Camera> mode. page 19
The LIGHT enables you to record a subject in dark places without sacrificing color.
The LIGHT can be used with
COLOR NITE function only.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE]. (SC-D363/D364/D365/D366 only)
3. Press the [ LIGHT ] button until <Color N. 1/15 ( )> appears.
[ Notes ]
The LIGHT will not turn on or off while you are recording.
The range of the LIGHT is limited. (up to 6.6ft (2m))
[ Danger ]
The LIGHT can become extremely hot.
Do not touch it while in operation or soon after turning it off, otherwise serious injury may
result.
Do not place the Camcorder into the carrying case immediately after using the LIGHT,
since it remains extremely hot for some time.
Do not use near flammable or explosive materials.
COLO
R NIT
E
LIGH
T
LIGHT
COLOR NITE
60min
0:00:10
Color N. 1/15
SP STBY
CA M
ER
A
PLAY
ER
1
3
Ï
ENGLISH
44 44
The Record Mode function works in both <Camera> and <Player> ( DV IN or AV IN
(SC-D365/D366 only) ) modes. page 19
This Camcorder records and plays back in SP (standard play) mode and in LP (long play)
mode.
- <SP> (standard play): This mode permits 60 minutes of recording time with a DVM60 tape.
- <LP> (long play): This mode permits 90 minutes of recording time with a DVM60 tape.
The Audio Mode function works in both <Camera> and <Player> modes. page 19
This Camcorder records sound in two ways. (12Bit, 16Bit)
- <12Bit>: You can record two 12Bit stereo sound tracks.
The original stereo sound can be recorded onto the Main (Sound1) track.
Additional stereo sound can be dubbed onto the Sub (Sound2) track.
- <16Bit>: You can record one high quality stereo sound using 16Bit recording mode.
Audio dubbing is not possible when using this mode.
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE]. (SC-D363/D364/D365/
D366 only)
3. Press the [MENU] button.
4. Move the
[Zoom] lever to the up or down to select <Record>, then press the [OK] button .
5. Move the [Zoom] lever to the up or down to select <Rec Mode> or <Audio Mode>,
then press the [OK] button .
6. Move the [Zoom] lever to the up or down to select desired record mode or audio mode,
then press the [OK] button .
Record mode can be set to <SP> or <LP>.
Audio mode can be set to <12Bit> or <16Bit>.
7. To exit, press the [MENU] button. The selected icon is displayed.
When <12Bit> is selected, no <12Bit> indication is displayed.
[ Notes ]
We recommend that you use this Camcorder to play back any tapes recorded on this Camcorder.
Playing back a tape recorded in other equipment may produce mosaic shaped distortion.
When you record a tape in SP and LP modes, or LP mode only, the playback picture may be
distorted or the time code may not be written properly if there is a gap between scenes.
Record using SP mode for best picture and sound quality.
[ Caution ]
To edit audio on your camcorder, you must set 12Bit for the Audio Mode and SP for the Rec
Mode.
Advanced Recording
Selecting the Record Mode & Audio Mode
Move Select Exit MENU OK ZOOM
Camera Mode
Record
Rec Mode
Audio Mode
WindCut Plus
Real Stereo
SP
12Bit
Auto
Off
Move Select Exit MENU OK ZOOM
SP
LP
4
6
Move Select Exit MENU OK ZOOM
12Bit
16Bit
6
7
60min
16Bit
0:00:10
SP
STBY
Ï
Ï
Camera Mode
Back
Rec Mode
Audio Mode
WindCut Plus
Real Stereo
Camera Mode
Back
Rec Mode
Audio Mode
WindCut Plus
Real Stereo