Samsung SC-D263, Service Manual

Page: 19 / 244

Alignment and Adjustments
3-5
Samsung Electronics
3-2-2 Camera Adjustment
Note : "XX XX" indicate the previous preset value and adjusted value.
Press the “PHOTO Button” (Confirm) to store the adjusted value.
CAMADJ
ODF EPR
FF EVR
FF
Adjusted values
Stored values
Fig. 3-6
1) EEPROM Data Initialize
Caution : These adjustments must be done when installing a new EEPROM (ICM15) in Main PCB.
Œ
Press the “EASY-Q”(Mode Up)/”DISPLAY”(Mode Down) buttons until CAMADJ displays “0DF XX XX”.
´
Press the “MACRO” or “ COLOR NITE”(Data Up/Down) so that display of EVR is “AA”
ˇ
Press the “PHOTO Button” (Confirm).
¨
The OSD shows “OK” after finishing the initalize.
(Show Fig. 3-8)
2) Lens Zoom Track
Caution : For whole zoom range, it shall be in focus.
The location of a focus lens is moving depending on the location of Zoom Lens.
During adjusting, micom measures the focus location from a near distance to a long.
Œ
Camera is set to E-E mode.
´
Set the Focus chart .
ˇ
Center the camera about 3m from a focus chart which, should be placed on a flat surfaced white or gray wall.
¨
Connect the video output terminal to a TV.
ˆ
Press the “EASY-Q” (Mode Up)/”DISPLAY” (Mode Down) buttons until OSD Shows “0DE XX XX”.
Ø
Press the “PHOTO Button” (Confirm).
Never impact on the lens when adjusting zoom and focus Lens.
The OSD Show “OK” after finishing the adjustment
(Show Fig. 3-8)
Fig. 3-7
3M
±
1cm
(Be sure to maintain the distance)
CCD LENS