Samsung SC-D263, Service Manual

Page: 166 / 244

Operating Instructions
11-44
Samsung Electronics
ENGLISH
95 95
After Finishing a Recording
Usable Cassette Tapes
At the end of a recording you must remove the power source.
When recording with a Battery Pack, leaving the pack on the Camcorder can reduce the life
span of the battery.
The Battery Pack should be release after recording is completed.
1.
Open the Casstte door while sliding the [TAPE EJECT] switch in the direction or the arrow.
Pull the cassette compartment out automatically.
Please wait while the tape is completely ejected.
2. After removing the tape, close the door and store the Camcorder in a dust free environment.
Dust and other foreign materials can cause square-shaped noise or jerky images.
3. Set the [Power] switch to the [Off].
4. Disconnect the power source or remove the Battery Pack.
Press the [BATTERY RELEASE] button located on the bottom of the Camcorder and slide the
Battery Pack in the direction of the arrow.
When you have recorded something that you wish to keep, you can protect it so that it will not be
accidentally erased.
a. Protecting a tape: Push the safety tab on the cassette so that the hole is uncovered.
b. Removing the tape protection:
If you no longer wish to keep the recording on the cassette, push the safety tab back so that
it covers the hole.
How to store a tape
a. Avoid places with magnets or magnetic interference.
b. Avoid humidity and dust prone places.
c. Keep the tape in an upright position and avoid storing it in direct sunlight.
d. Avoid dropping or knocking your tapes.
Maintenance
CA M
ER
A
PLAY
ER
1
3
SAVE
a
REC
b
ENGLISH
96 96
Maintenance
Cleaning and Maintaining the Camcorder
Cleaning the Video Heads
To ensure normal recording and clear pictures, clean the video heads when the playback pictures display square block-
shaped noise or distortion, or a blue screen appears.
1. This function works only in <Player> mode. page 19
2. Set the [Mode] switch to [TAPE]. (SC-D363/D364/D365/D366 only)
3. Insert the cleaning tape.
4. Press the [ / (PLAY/STILL)] button.
5. Press the [ (STOP)] button after 10 seconds.
[ Notes ]
Check the quality of the picture using a videocassette.
- If the picture quality has not improved, repeat the operation.
Clean the video heads with a dry type cassette cleaner.
Some cleaning cassette products stop automatically. Refer to the cleaning cassette s instructions for detailed
information. If the problem continues after the cleaning, consult your nearest Samsung dealer or Authorized Service
Center. (blue screen)
(blue screen)