CHAPTER 8
© SAMSUNG Electronics Co., Ltd.
Page 8-1
Starting the System
This chapter describes items to check before starting the OfficeServ 7200 system, the
procedure for starting the system, and the procedure for testing whether the system is
normally operating after startup.
1 Pre-Check
This section describes items to check before starting the OfficeServ 7200 system.
1.1 Atmospheric
Conditions
y
Temperature
Check if the temperature of the room where the system is installed is between
0
°
C and 45
°
C. If the room temperature is higher or lower than the normal
operation temperature, install a heating/cooling device to maintain normal
temperature.
y
Humidity
Check if the humidity of the room where the system is installed is between
10 % and 90 %. Take special caution since humidity affects the electrical
components and connectors of the system.
y
Direct sunlight and dust
The room where the OfficeServ 7200 system is installed should be protected
from direct sunlight and should have ventilation systems to prevent the system
from malfunctioning due to dusts.