OfficeServ 7200 Installation guide/Ed.00
CHAPTER 2. Installing Chassis
© SAMSUNG Electronics Co., Ltd.
Page 2-5
4
Installing on a
Wall
This section describes how to install the OfficeServ 7200 Chassis on a wall.
4.1 Required
Tools
y
A middle-sized cross screwdriver
y
An electric drill
y
A hammer
y
A wall bracket
y
Four plastic anchors
y
Four cross screws
y
Four mount lock screws
Figure 2.6 Tools
Required
for
Wall
Installation
4.2 Wall
Installation
The procedure for installing the OfficeServ 7200 Chassis on a wall by using a wall
bracket is as follows:
1) There are four screw holes on the wall bracket as shown below. Mark the four screw
holes where the wall bracket should be installed.
Figure 2.7 Wall
Installation (1)