CHAPTER 3. Mounting and Replacing Modules
OfficeServ 7200 Installation guide/Ed.00
Page 3-8
© SAMSUNG Electronics Co., Ltd.
2.3
Connecting MCP Module to LCP Module
If the OfficeServ 7200 system consists of a basic Chassis and an extension Chassis,
connect the MCP Module to the LCP Module using extension cables to transmit
and receive signals between the control Modules.
1) Three extension cables are needed to connect the MCP Module to the LCP
Module, these are provided with the LCP Module and
MUST NOT
be substituted.
Figure 3.7 Extension Cables
2) One of the three extension cables is for connecting the LINK1 port of the MCP
Module of the basic Chassis to the LINK1 port of the LCP Module of the
expansion Chassis.
Another cable is for connecting the LINK2 port of the MCP Module to LINK2 port
of the LCP Module. The last one is for connecting the LINK3 port of the MCP
Module to LINK3 port of the LCP Module.
Figure 3.8 Connecting
MCP Module to LCP Module
LINK1
LINK3
LINK2