CHAPTER 2. Installing Chassis
OfficeServ 7200 Installation guide/Ed.00
Page 2-6
© SAMSUNG Electronics Co., Ltd.
2) Use the electrical drill to make holes where the screw holes were marked.
The depth of the hole should be over 35 mm and the diameter should be about
5.5 mm so that the plastic anchor can be easily inserted.
Figure 2.8 Wall Installation (2)
3) Using a hammer, insert the plastic anchor into the hole.
Figure 2.9 Wall Installation (3)
4) Once the wall bracket is fixed to the wall, put a cross screw into the plastic
anchor and tighten the screw with the screwdriver.
Figure 2.10 Wall Installation (4)