CHAPTER 5. Maintenance
OfficeServ 500 Wireless LAN Service Manual/Ed.00
Page 5-16
© SAMSUNG Electronics Co., Ltd.
2.2
Upgrading via the Network Booting
This method is used to recover an error such as non-functioning flash memory.
This method is impossible to upgrade wirelessly, but only through a wired LAN.
If the WBS24 is connected with a wired LAN, it is possible to upgrade without any
change on the WBS24. But if not the case, the wired LAN shall be connected
between the WBS24 and the PC in order to upgrade the WBS24. This section
describes how to upgrade the WBS24 based on the assumption that the WBS24 is
connected to the wired LAN.
Preparing Materials
PC server with a wired LAN port
Upgrade file for the network booting(bin type)
Upgrade Procedure
1) Set the PC to the TFTP/BootP Server for the network booting. Set the PC by
using an application program for PC. This description explains how to set up
using the ‘Cabletron TFTP/BootP Services 2.0 S/W. When another S/W is used,
refer to the relevant usage of S/W. The following describes how to set up
‘Cabletron TFTP/BootP Services 2.0 S/W’.
Receive the program and execute the Setup procedure to set up the program.
Execute the program(When designating a default directory, execute
‘C:\TFTPBOOT\BIN\TFTPBOOT.EXE’) and click the [Start Download] button.
Enter IP of the installed PC and click the [BootP Server] button.
Figure 5.15 Upgrading the WBS24 S/W via the Network Booting (1)
#
Enter the IP of installed PC
and press the Enter key
$
Press the BootP Server button
"
Press the Start Download button
