CHAPTER 4. MMC Programming
OfficeServ 500 Wireless LAN Service Manual/Ed.00
Page 4-12
© SAMSUNG Electronics Co., Ltd.
Program Procedure Display Screen
1) Press the [TRSF] button, and enter 848..
2) Press the [SPK] key and enter the select menu.
Press the Soft key to change the IP ADDRESS
while assigning the IP ADDRESS.
3) Use the Soft key to position the cursor at an
IP ADDRESS, and assign the IP ADDRESS by
entering values of 0~255.
4) Numbers next to USED indicates the terminal
number from which the IP ADDRESS was
assigned.
Related Programs
MMC 846
WIP INFO
MMC 847
WLI RESET
MMC 849
WLI REGIST
2.5
Setting the MMC849 WLI REGIST
This MMC is used to enable or disable the register of a WIP500M mobile phone
within the WLAN. This MMC is also used to approve the WEP(Wired Equivalent
Privacy) enabling function where the WLAN is encrypted. The WEP key, which must
be used when WEP is enabled, can be configured with 16 characters or less.
Also, the MMC is used to set MAC addresses in the data terminal in order to use the
wireless LAN.
IP:001 USED
0.0.0.0
848: WLI LISTS
SELECT PROG ID
IP:001 USED
168.0.0.0
IP:001 USED 8601
168.219.149.5