manualshive.com logo in svg

Samsung ML-2950ND, User Manual

Share
Download
Samsung ML-2950ND User Manual Download Page 22

22

1. Introduction

Installing the driver locally

A locally connected machine is a machine directly attached to your 
computer using the cable. If your machine is attached to a network, 
skip the following steps below and go on to installing a network 
connected machine’s driver (see Advanced Guide).

 

• If you are a Macintosh, Linux, or Unix OS user, refer to the 

Advanced guide. 

• The installation window in this User’s Guide may differ 

depending on the machine and interface in use.

• Selecting 

Custom Installation

 allows you to choose 

which programs to install. 

• Only use a USB cable no longer than 3 meters (118 inches).

 

12 

Windows

1

Make sure that the machine is connected to your computer 
and powered on.

 

If the “

Found New Hardware Wizard

” appears during the 

installation procedure, click 

Cancel

 to close the window.

 

2 

Insert the supplied software CD into your CD-ROM drive.

The software CD should automatically run and an installation 
window will appear.

3 

Select 

Install Now

.

4 

Read 

License Agreement

, and select 

I accept the terms of 

the License Agreement

. Then, click 

Next

.

5 

Follow the instructions in the installation window.

Summary of Contents for ML-2950ND







































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands