manualshive.com logo in svg

Samsung ML-2950ND, User Manual

Share
Download
Samsung ML-2950ND User Manual Download Page 102

12

2. Using a network-connected machine

Useful network programs

There are several programs available to setup the network settings 
easily in a network environment. For the network administrator 
especially, managing several machines on the network is possible.

 

Before using the programs below, set the IP address first.

 

1 

SyncThru™ Web Service

The web server embedded on your network machine allows you to 
do the following tasks (see "Using SyncThru™ Web Service" on page 
29):

•

Check the supplies information and status.

•

Customize machine settings.

•

Set the email notification option. When you set this option, the 
machine status (toner cartridge shortage or machine error) will 
be sent to a certain person's email automatically.

•

Configure the network parameters necessary for the machine to 
connect to various network environments.

2 

SyncThru™ Web Admin Service

Web-based machine management solution for network 
administrators. SyncThru™ Web Admin Service provides you with an 
efficient way of managing network devices and lets you remotely 
monitor and troubleshoot network machines from any site with 
corporate internet access. Download this program from http://
solution.samsungprinter.com.

3 

SetIP

This utility program allows you to select a network interface and 
manually configure the IP addresses for use with the TCP/IP protocol.

•

See "IPv4 configuration using SetIP (Windows)" on page 13.

•

See "IPv4 configuration using SetIP (Macintosh)" on page 15.

•

See "IPv4 configuation using SetIP (Linux)" on page 15.

 

TCP/IPv6 is not supported by this program.

 

Summary of Contents for ML-2950ND







































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands