manualshive.com logo in svg

Samsung ML-2950ND, User Manual

Share
Download
Samsung ML-2950ND User Manual Download Page 211

Operating system problems

121

6. Troubleshooting

 

Refer to the Linux User’s Guide that came with your computer for further information on Linux error messages.

 

4 

Common PostScript problems

The following situations are PS language specific and may occur when several printer languages are used.

 

 

Problem

Possible cause

Solution

The PostScript file cannot 
be printed.

The PostScript driver may not be installed 
correctly.

• Install the PostScript driver (see "Software installation" on page 4).

• Print a configuration page and verify that the PS version is available 

for printing.

• If the problem persists, contact a service representative.

Limit Check Error report 
prints.

The print job was too complex.

You might need to reduce the complexity of the page or install more 
memory.

A PostScript error page 
prints.

The print job may not be PostScript.

Make sure that the print job is a PostScript job. Check to see whether 
the software application expected a setup or PostScript header file to 
be sent to the machine.

The optional tray is not 
selected in the driver.

The printer driver has not been 
configured to recognize the optional tray.

Open the PostScript driver properties, select the 

Device Options

 tab, 

and set the tray option.

Summary of Contents for ML-2950ND







































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands