manualshive.com logo in svg

Samsung KS8910, User Manual

The Samsung KS8910 is a cutting-edge television with remarkable features. To unlock its full potential, make sure to get your hands on the free user manual. Accessible for download from manualshive.com, the manual offers step-by-step instructions and valuable insights to enhance your viewing experience.

Share
Download
background image

A-3

KS8910 100/10 Mbps ETHERNET TRANSCEIVER

 APPENDIX

Preliminary Spec. ver

 1.4

•

Globally administered address - An Ethernet address whose second bit transmitted, used to distinguish
between locally or globally administered addresses, is set to 0, indicating a globally administered (or U,
universal) address. If an address is to be assigned locally, this bit is set to 1. Note that for the broadcast
address, this bit is also a 1.

•

Group address - An Ethernet destination address whose first bit transmitted, used to identify it either as an
individual or as a group address, is 1, indicating that the address field contains a group address that identifies
none, one or more, or all of the stations connected to the local area network. More commonly called a multicast
address. The first byte of a multicast address is odd, for example, 01-00-00-00-00-00. There are two kinds of
multicast address: (a) Multicast-group address. An address associated by higher-level convention with a group
of logically-related stations. (b) Broadcast address. A distinguished, predefined multicast address, ff-ff-ff-ff-ff-ff,
that always denotes the set of all stations on a given local area network.

•

HDLC - High-level Data Link Control. Used in X.25.

•

Heartbeat - Signal Quality Error (SQE).

•

IAB - Internet Activities Board.

•

ICMP - Internet Control Message Protocol. The protocol to handle error and control information between
gateways and hosts. TCP/IP networking software, not user processes, generates and processes ICMP
messages.

•

IEEE 1149.1 - See JTAG.

•

IEEE 802.12 - 100-Mbit/s standard based on demand priority. Also, 100BASE-VG or AnyLAN.

•

IEEE 802.3 - Information technology Local and metropolitan area networks Part 3: Carrier sense multiple
access with collision detection (CSMA/CD) access method and physical layer specifications. International
Standard ISO/IEC 8802-3: 1993(E), ANSI/IEEE Std. 802.3, 1993 Edition, July 8, 1993. Also, Ethernet.

•

IEEE 802.4 - Token bus.

•

IEEE 802.5 - Token ring.

•

Individual address - An Ethernet address whose first bit transmitted, used to identify it either as an individual or
as a group address, is 0, indicating that the address field contains an individual address, and so is associated
with a particular station on the network. The first byte of a individual address is even, for example, 00-00-00-00-
00-00.

•

IP - Internet Protocol. Fragments (segments), routes, delivers, and reassembles packets for TCP, UDP, and
ICMP. Connectionless and unreliable. Adds a 20-byte header and a check sum.

•

ISDN - Integrated Services Digital Network.

•

ISO - International Organization for Standardization.

•

Jabber - In order to protect the network from babbling nodes, IEEE Std. 803.3 requires MAUs to inhibit
transmission onto the network if they have been transmitting for an excessive time. The window for jabber must
be between 20 and 150 ms.

1

•

JTAG - Joint Test Action Group. A group of companies that developed what became IEEE 1149.1 Test Access
Port... for board-level production test of integrated-circuit pin continuity.

1. Project 802 Local and Metropolitan Area Networks. Draft Guide to ANSI/IEEE Std. 802.3 (CSMA/CS Ac-

cess Method and Physical Layer Specifications). SysTAG Network Guide, Draft 5.2, January 23, 1994.
Section 3.5 False Jabber, page 13.

Summary of Contents for KS8910




































































































Reviews:

No comments

Related manuals for KS8910

Garod Radio 900 Series Service Manual preview
900 Series
Brand: Garod Radio Pages: 29
Samsung TV Quick Manual preview
TV
Brand: Samsung Pages: 10
Icom PMR446 Service Manual preview
PMR446
Brand: Icom Pages: 27
JAMO R-300 Product Manual preview
R-300
Brand: JAMO Pages: 4
AALogic ST-101 User Manual preview
ST-101
Brand: AALogic Pages: 17
Harman BDS 280 Quick Start Manual preview
BDS 280
Brand: Harman Pages: 30
Paul Wegener DS1/420 Operating Manual preview
DS1/420
Brand: Paul Wegener Pages: 8
Voscom VOS-8040FDMR Installation Manual preview
VOS-8040FDMR
Brand: Voscom Pages: 15
E+H Cerabar T PMP 135 Technical Information preview
Cerabar T PMP 135
Brand: E+H Pages: 12
BluStream HEX31WP-TX Quick Reference Manual preview
HEX31WP-TX
Brand: BluStream Pages: 4
Maico TRE 0,4-2 Mounting Instructions preview
TRE 0,4-2
Brand: Maico Pages: 24
Fortec Star Mercury II Digital FTA Quick Start preview
Mercury II Digital FTA
Brand: Fortec Star Pages: 3
Fiio Pro BTA30 Quick Start Manual preview
Pro BTA30
Brand: Fiio Pages: 8
Arylic Up2Stream Pro User Manual preview
Up2Stream Pro
Brand: Arylic Pages: 4
Allo RemoteControl BECKER VC420 Instructions preview
BECKER VC420
Brand: Allo RemoteControl Pages: 2
Voscom VOS-1HD-ADCEMR Installation Manual preview
VOS-1HD-ADCEMR
Brand: Voscom Pages: 18
Omega UWTC Series Quick Start Manual preview
UWTC Series
Brand: Omega Pages: 20
Chamberlain 955CB Owner'S Manual preview
955CB
Brand: Chamberlain Pages: 2

Brands by name

Popular brands

Load more brands