Samsung DB22D User Manual Download Page 42

Page: 42 / 159

Home feature

―

To use the

Player

feature, set

Play via

MagicInfo

System

Play a range of content such as channels with schedules assigned, templates or files.
Play channels or content using any of the following methods.

•

Network Channel

: Play content using the server.

―

To run

Network Channel

, make sure the product is connected to the server.

•

Local Channel

: Play content in internal memory or from external memory.

Player

HOME

→

Player

→

ENTER

Player

Play various contents sych as scheduled
channels, templates or files.

Clone Product

Picture Mode

ID Settings

On/Off Timer

Video Wall

Ticker

Network Status

More settings

Schedule

Template

The displayed image may differ depending on the model.

This feature is provided in

Support

→

Go to Home

Accessible using the

HOME

button on the remote control.

Summary of Contents for DB22D
































































































































































Search results

Summary of Contents for DB22D

Reviews:

Related manuals for DB22D

Brands by name

Popular brands

Samsung DB22D, User Manual

Search results

Summary of Contents for DB22D

Reviews:

Related manuals for DB22D

Brands by name

Popular brands