Power Control
MENU
m
→
System
→
Power Control
→
ENTER
E
Power Control
Auto Power On
Max. Power Saving
Standby Control
Power Button
Network Standby
Off
On
Auto
Power on only
Off
-
The displayed image may differ depending on the model.
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
•
Off
/
On
Max. Power Saving
Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.
•
Off
/
On
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
•
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message
No Signal
will appear if no source device is connected.
•
Off
The message
No Signal
will appear if no input signals are detected.
―
If
No Signal
is displayed although a source device is connected, check the cable connection.
―
If
No Signal Message
is set to
Off
,the
No Signal
message does not appear.
If this is the case, set
No Signal Message
to
On
.
•
On
Power-saving mode will activate if no input signals are detected.
Summary of Contents for DB22D
Page 25: ...Connection RJ45 RJ45 ...
