Samsung DB22D User Manual Download Page 14

Page: 14 / 159

Parts

Control Panel

SOURCE

―

The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to

improve quality.

Buttons

Description

SOURCE

Selects the input source that an external device is connected to.

Use this button for turning the Display on and off.

Remote sensor

Press a button on the remote control pointing at the sensor on the front of the
product to perform the corresponding function.

―

Using other display devices in the same space as the remote control of this

product can cause the other display devices to be inadvertently controlled.

Use the remote control within 7 m to 10 m from the sensor on the product at an angle of 30 from the left and right.

―

Store used batteries out of reach of children and recycle.

―

Do not use a new and used battery together. Replace both batteries at the same time.

―

Remove batteries when the remote control is not to be used for an extended period of time.

Summary of Contents for DB22D
































































































































































Search results

Summary of Contents for DB22D

Reviews:

Related manuals for DB22D

Brands by name

Popular brands

Samsung DB22D, User Manual

Search results

Summary of Contents for DB22D

Reviews:

Related manuals for DB22D

Brands by name

Popular brands