Samsung DB22D User Manual Download Page 130

Page: 130 / 159

Using a USB device

Connecting a USB device

Turn on your product.

Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product.

The

Player

page automatically appears as soon as a USB device connects to the product.

―

If only one USB device is connected, files saved on the USB device are displayed automatically.

―

To view content saved on a USB device, connect the USB device to a USB port on the product.

Removing a USB device

Removing a USB device from Source

Press

SOURCE

on the remote control. Alternatively, go to

Source

using the OSD menu.

SOURCE

→

Source

Select

USB

from

Source

, and then press the

TOOLS

button on the remote control. The

Options

menu is displayed.

Select

Disconnect USB Device

and wait until the USB device is disconnected. The USB device is disconnected.

It is recommended to use a USB HDD that
has a power adapter.

It is recommended to remove a USB
device using the

Disconnect USB Device

function.

Summary of Contents for DB22D
































































































































































Search results

Summary of Contents for DB22D

Reviews:

Related manuals for DB22D

Brands by name

Popular brands

Samsung DB22D, User Manual

Search results

Summary of Contents for DB22D

Reviews:

Related manuals for DB22D

Brands by name

Popular brands