Samsung DB22D User Manual Download Page 62

Page: 62 / 159

Clone Product

HOME

→

Clone Product

→

ENTER

Clone Product

The displayed image may differ depending on the model.

Export the product settings to a USB device or load the settings via a USB device.
This option is useful when assigning the same settings to several products.

When USB does not contain a duplicate file

Connect the USB device to a USB port. Run the

Clone Product

function.

The

No cloning file found on the USB device. Copy system settings from this product to the USB storage device?

message appears.

When USB contains a duplicate file

Connect the USB device to a USB port. Run the

Clone Product

function.

The

Cloning file found. Please select an option.

message appears.

Run the

Clone From USB

Clone to USB

function.

Clone From USB

: Apply the USB device settings to the product.

Clone to USB

: Copy the product settings to the USB device.

―

After configuration is complete, the product is rebooted automatically.

Summary of Contents for DB22D
































































































































































Search results

Summary of Contents for DB22D

Reviews:

Related manuals for DB22D

Brands by name

Popular brands

Samsung DB22D, User Manual

Search results

Summary of Contents for DB22D

Reviews:

Related manuals for DB22D

Brands by name

Popular brands