60
S Mode Programming
SPS-2000 Program Manual v1.30
MACRO #
117
Use to execute one of the forty possible macros by entering the macro
number and touching the
MACRO #
key.
MDSE RETURN
118
Touch the MDSE RETURN key to adjust items inside or outside of a
transaction.
MISC TEND 1-16
119-
134
Touch a MISC TEND key to finalize or tender sales paid by various
charges or other media. Tendering may or may not be allowed
depending upon function key programming. (Charge is the default
descriptor for MISC TEND #1)
MISC TEND #
135
Access any of the 16 possible miscellaneous tender functions by
entering the tender number (1-16) and touching the
MISC TEND #
key.
MODIFIER 1-10
136-
145
Preceding a PLU entry, a modifier key changes a digit of the PLU
number, causing a different PLU to be registered. Modifier keys can be
set to change any of the 14 PLU digit positions to any specified digit (0-
9).
#/NO SALE
147
Use to enter a non-adding memo number during a transaction (#
function) or use to open the cash drawer outside of a sale (no sale
function).
P/BAL
148
Enter an amount, and then touch the Manual Previous Balance (P/BAL)
key to enter a beginning balance in a “Hard Check” system.
Transactions where the P/BAL key is used must be finalized with one of
the STORE CHECK keys.
PAID OUT 1-5
151-
155
Touch a PAID OUT key to remove cash, check or miscellaneous media
from the drawer.
PAID RECALL
156
The PAID RECALL key is used to recall last x number of transactions,
starting with the last transaction finalized. (X is determined in memory
allocation.) Once recalled, a transaction could be reviewed (using the
cursor keys or PAGE UP/PAGE DN). To exit the paid order view,
touch CLEAR.
%1 - %10
157-
166
Ten discount keys (%1 - %10) are available to handle various kinds of
discounts, markdowns and adjustments to items or transactions.
PLU
167
Enter the PLU code number and touch PLU to register a PLU.
PRICE INQ
169
Touch the PRICE INQ to display the PLU price without actually
registering the PLU.
PRICE LVL 1-20
170-
189
Touch a LEVEL key prior to a PLU entry to shift the price of a PLU to
a different price set in PLU programming.
190
Touch the PRINT function to send items that require special preparation
to the kitchen printer (or KVS) before the sale is finalized. An item can
be programmed as an auto grill item, requiring the PRINT key to be
touched every time the menu item is sold. This function does not affect
normal kitchen printer/KVS routing. The PRINT function also sends
items in group sequence using the “meal order feature” available at
version 2.02n or later. Items are given a meal order priority through
group programming. Each time the PRINT key is touched, the next
priority of items will be release to the kitchen printer.
