SPS-2000 Program Manual v1.30
P Mode Programming
127
If No, any Z report is disabled until open orders are closed.
(15) ALLOW Z STOCK REPORT
If Yes, resetting the Stock report is allowed.
(16) ALLOW Z1 TIME KEEPING REPORT
WHEN EMPLOYEES ARE CLOCKED IN
If Yes, the time keeping report can be run when employees are clocked in.
(17) AVG. GST ON FIN IS FROM GST
If No, the AVG/GST (average sale per guest or customer) is calculated from customer count, if Yes, is
calculated from guest count from GUEST key use.
(18) ALLOW Z WITH OPEN CLERKS
If Yes, Z reports are allowed with interrupted orders when clerk interrupt is used.
(19) MAKE IRC REPORT IN DEFAULT?
When Yes, any report taken will be automatically an IRC report. All registers in the range identified in S-
Mode options will be included.
(20) MGR REQUIRED FOR IRC SETTING?
When Yes, the manager password must be entered to change IRC report settings.
(21) CLEAR GLOBAL ORDER# AFTER Z1 FINAN?
If Yes, the global order number counter will reset to zero after a Z1 Financial report.
(22) EXCLUDE TAX ON TIME PERIOD REPORT? (added V2.00c)
The Time period report feeds the totals for the SALES & LABOR % report. This options allows the
totals to be without tax.
(23) PLU COST PRICE LEVEL (0-20)
If you wish to report PLU cost, profit, and profit ratio, select the PLU Price Level where the PLU cost
will be entered
(24) ENABLE INVENTORY REPORTING WITHOUT ACTUAL INVENTORY INPUT (V2.02b or
later)
If YES, the SPS-2000 will use the theoretical values as actual inventory if inventory is not activated
through the EDIT INVENTORY ITEM function of X-mode.
Time Keeping Option Definitions
(1) OVERTIME HOUR IS USED FOR
Select Day or Week for overtime hours.
(2) HOURS PER OVERTIME STARTS
Enter the number of hours that must be worked per day or week before overtime starts. For example, if
field #1 is day, enter 8 hours, or if field #1 is week, enter 40 hours.
(3) OVERTIME FACTOR
Enter the factor times which the standard pay rate is multiplied to determine overtime pay, i.e. enter 1.5 if
rate is time and one half, or enter 2.0 if rate is double time.
