SPS-2000 Program Manual v1.30
P Mode Programming
79
PLU Add & Change
1.
From the
PGM
mode PROGRAMMING MENU touch
PLU
to view the PLU program selection
window.
2.
Touch
PLU ADD & CHANGE
to view the SELECT PLU screen.
3.
You can edit existing PLUs in one of two ways:
Touch a PLU key located on the MAIN SCREEN, or touch
PAGE UP
/
PAGE DOWN
until the
appropriate Key Link where you wish to edit a PLU displays. (Note: Beginning at v3.00c you can
touch a modifier key, the a PLU.)
Enter the PLU number and touch
OK
.
You can add new PLUs in one of two ways
:
New PLUs that are to be located the MAIN SCREEN or a Key Link must first be assigned to a key
location in
S
mode. Once a new PLU is assigned to a screen, touch the key to add the PLU descriptor
and options.
PLUs can be randomly added by entering a PLU number and touching
OK
, or by scanning an item if
a scanner is connected.
