background image

 

34 

 Software Installation & SD Memory Utilities 

SPS-2000 Program Manual v1.30 

Bootloader Upgrade from SD Card 

Beginning at BootROM version 1.10, both bootloader and operating system files can be updated from the SD 
card (not USB).  Updates to ECRs with BootROM versions before version 1.10 must be done using the TFTP 
server method.    
 

NOTE

:  SD cards must be formatted as FAT 32.  To avoid compatibility issues, CRS recommends that you 

purchase SD cards from CRS.   

1.

 

Go to the SPS-2000 dealer support page of 

www.crs-usa.com

 and download the zip file for the most 

current complete software version.  Unzip and locate the BootRom.bin file.  

2.

 

At your PC, create an “Update” folder on the root of the SD card.  Copy the BootRom.bin file to this 
folder.  In Windows Explorer, your view should look similar to this:  

 

 

 

 

 

 

 

3.

 

Insert the SD card into the SPS-2000. 

4.

 

Power down the SPS-2000 (the main power switch is located on bottom of SPS-2000 in the right-rear 
corner). 

5.

 

Hold front power button down. 

6.

 

Turn SPS-2000 main power switch 

ON

 while holding down front power button. 

7.

 

Touch [

1

][

2

][

8

][

7

] for system password. 

8.

 

Touch 

SYSTEM MENU

9.

 

Touch 

BOOT UPDATE - SD

10.

 

After updating is complete, turn the SPS-2000 power off.   

11.

 

Perform an All Clear 

a.

 

Power down the SPS-2000 (the main power switch is located on bottom of SPS-2000 in the 
right-rear corner). 

b.

 

Hold front power button down. 

c.

 

Turn SPS-2000 main power switch 

ON

 while holding down front power button. 

d.

 

Touch [

1

][

2

][

8

][

7

] for system password. 

e.

 

Touch 

ALL CLEAR

f.

 

Touch 

YES

 when prompted “ALL CLEAR THE MACHINE?”. 

g.

 

The SPS-2000 will reboot. 

h.

 

Enter the station number after the station reboots: [1] 

OK

.  

 

Summary of Contents for SPS-2000




































































































































































































Reviews: