70
S Mode Programming
SPS-2000 Program Manual v1.30
CUTTING AFTER PRINTING
When a printer has the capabilities of auto cut, this option will decide if that feature is to be used. For
receipts it is commonly set to yes, however detail journal printers do not require this option.
IN CASE OF PRINTER, KICK THE DRAWER
Used to send audible beep using an optional beeper.
PRINT UPSIDE DOWN (V2.01n or later)
The printer will print the receipt upside down so that if the printer is wall-mounted, or placed vertically,
the user can read easily. Supported printers are: SAM4s Ellix 10, Ellix 20, Bixolon SRP-350, Epson
TM-T88-2. If the number of lines to print in one print job exceeds 1000, the SPS-2000 will ignore the
option.
DEVICE
This is the peripheral that will be connected to the port. The following options can be chosen:
DISABLE
The port is not active
PRINTER
The port will be used to operate a printer, you are then presented with a list of Printer types, all of
which are pre-programmed with Driver setting.
VIDEO
This is a linked Kitchen Video System for the display of products.
POLLING
This is the on-line computer link.
SCALE
This links to an approved scale for weighted items. Beginning at version 3.00x, the “OZ Scale” setting
supports the Avery Berkel 6712 POS scale, capable of weighing in ounces (rather than pounds).
NOTE:
If weighing by ounces, the price per ounce must be preset in the PLU price. The scale will
weigh in ounces and compute the correct price per ounce.
SCANNER
This option enables a barcode scanner.
EFT TERMINAL
This option links a DataTran integrated payment device.
CHANGER
This option allows a coin changer to be connected.
POLE DISPLAY
This option allows a pole display to be connected.
LIQUOR
This option allows a liquor dispenser to be connected.
PDC
The option enables a peripheral device controller.
