background image

10.84 (275.2)

8.57

(217.7)

2.06 (52.4)

8.8

(224)

(MOUNTING CLIPS INSTALLED)

11.1 (281)

2.97 (76)

Module sold

separately

GRAPHITE™ SERIES 

10" Color Touchscreen Operator Interface
Installation Guide

DIMENSIONS  In inches (mm)

See the Red Lion website or the enclosed USB thumbdrive 
for full user manual, Crimson software and software 
manual.

SAFETY SUMMARY

All safety related regulations, local codes and instructions that appear in this 

literature or on equipment must be observed to ensure personal safety and to 
prevent damage to either the instrument or equipment connected to it. If 
equipment is used in a manner not specified by the manufacturer, the protection 
provided by the equipment may be impaired. Do not use this unit to directly 
command motors, valves, or other actuators not equipped with safeguards. To 
do so can be potentially harmful to persons or equipment in the event of a fault 
to the unit.

ORDERING INFORMATION

DESCRIPTION

PART NUMBER

10" color touch screen, indoor use, 24 VDC powered

G10C0000

10" color touch screen, indoor use, 24 VDC powered, 
additional ethernet port

G10C1000

10" high resolution display, color touch screen, indoor use, 
24 VDC powered

G10R0000

10" high resolution display, color touch screen, indoor use, 
24 VDC powered, additional ethernet port

G10R1000

10" color touch screen, indoor/outdoor use, 24 VDC powered

G10S0000

10" color touch screen, indoor/outdoor use, 24 VDC powered, 
additional ethernet port

G10S1000

SPECIFICATIONS

POWER

: +24 VDC ±20%

G10C/R 

G10S

Typical Power HMI only: 

12 W 

18 W

Maximum Power HMI only: 

19 W 

24 W

Available Power for Modules:   29 W 

29 W

    HMI With Module(s): 

48 W 

53 W

Must use a Class 2 circuit according to National Electrical Code (NEC), 

NFPA-70 or Canadian Electrical Code (CEC), Part I, C22.1 or a Limited 
Power Supply (LPS) according to IEC 60950-1 or Limited-energy circuit 
according to IEC 61010-1.
Power connection via removable three position terminal block.

CAUTION: Risk of Danger.

Read complete instructions prior to 

installation and operation of the unit.

CAUTION: 

Risk of electric shock.

Drawing No.  LP0909 D
Released  05/15

WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT 
EQUIPMENT UNLESS POWER HAS BEEN SWITCHED OFF 
OR AREA IS KNOWN TO BE NON-HAZARDOUS.

WARNING - EXPLOSION HAZARD - SUBSTITUTION OF 
COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I, 
DIVISION 2

C

US LISTED

UL

R

IND. CONT. EQ.

34AD

FOR USE IN HAZARDOUS LOCATIONS: 

Class I, Division 2, Groups A, B, C, and D 
Class II, Division 2, Groups F and G 
Class III, Division 2

C

US

UL

R

LISTED

IND.CONT. EQ.

3PWL

II 3 G Ex ic nA IIC T4 Gc 
II 3 D Ex tc IIIC T135°C Dc 
DEMKO 14 ATEX 1387X 
IECEx UL 15.0035X

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Summary of Contents for G10C0000

Page 1: ...DC powered additional ethernet port G10R1000 10 color touch screen indoor outdoor use 24 VDC powered G10S0000 10 color touch screen indoor outdoor use 24 VDC powered additional ethernet port G10S1000 SPECIFICATIONS POWER 24 VDC 20 G10C R G10S Typical Power HMI only 12 W 18 W Maximum Power HMI only 19 W 24 W Available Power for Modules 29 W 29 W HMI With Module s 48 W 53 W Must use a Class 2 circui...

Page 2: ...f not more than Pollution Degree 2 per EN 60664 1 Must be wired using Division 2 wiring methods as specified in article 501 4 b 502 4 b and 503 3 b of the National Electrical Code NFPA 70 for installation within the United States or as specified in section 19 152 of Canadian Electrical Code for installation in Canada PANEL CUT OUT 10 197 259 0 7 931 201 4 4X R 10 2 5 MAX All tolerances 059 1 5 mm ...

Page 3: ... the modules order in the Crimson database Torque screws to 6 0 pound force inch 96 ounce force inch 0 68 N m REMOVE RUBBER MODULE PLUG WARNING Disconnect all power to the unit before installing or removing modules POWER SUPPLY REQUIREMENTS The G10 requires a 24 VDC power supply Your unit may draw considerably less than the maximum rated power depending upon the features being used As additional f...

Page 4: ...nner that complies with your local waste regulations The battery must not be disposed of in fire or in a manner whereby it may be damaged and its contents could come into contact with human skin The battery used by the panel is a lithium type BR2032 WARNING EXPLOSION HAZARD DISCONNECT POWER AND ENSURE THE AREA IS KNOWN TO BE NON HAZARDOUS BEFORE SERVICING REPLACING THE UNIT AND BEFORE INSTALLING O...

Reviews: