MorphoAccess® SIGMA Family Administrator Guide
MorphoAccess® Terminal Administration Menu
2017_2000025464-v03
This document and the information therein are the property of Morpho. They must not
be copied or communicated to a third party without the prior authorization of Morpho
93
July 17
Figure 66:
Defining User Rule – Trigger Source
36.
Trigger Source: The administrator can configure which of the following triggers the
terminal for the access.
a.
Set Biometric as ON, if the administrator wants to allow user to access by
fingerprint identification. If trigger event through biometric is OFF, then user
cannot initiate the access rights check using fingerprint. And Biometric Check
will be bypass for the particular user.
NOTE: In case the MorphoAccess® SIGMA Family terminal is configured in the
Legacy L1 mode, a generic user rule is required to be set as authentication using
Card Only. The administrator can set this from the following access path
Biometric Security > Trigger event.
And biometric check of the users, except the ones whose biometric check has
been bypassed, is required to be enabled using specific user rule configuration.
b.
Set Contactless Card as ON, if the administrator wants to allow the user to
request access by presenting card authentication
c.
Set Keypad as ON, if the administrator wants to allow the user to request access
by entering User ID and PIN using keypad. The authentication is done by
matching provided PIN with the stored data of the same user.
d.
Set External Port as ON, if the administrator wants to allow the user to request
access by providing his User ID through External port