MorphoAccess® SIGMA Series - Administrator Guide
2017_2000025464-v03
This document and the information therein are the property of Morpho. They must not
be copied or communicated to a third party without the prior authorization of Morpho
426
July 17
Screens & Steps
Figure 348:
Creating a Holiday Schedule
1.
Enter Schedule Name, usually the name of the holiday (such as "Christmas")
2.
Select Start Date and End Date of the holiday, by default the date format is YYYY-MM-
DD. One schedule allows to specify several consecutive days
3.
Select Start Time and End Time, applicable on selected dates. By default the date
format is HH:MM:ss. During this time slab, access is not granted.
NOTE: If terminal is in L1 Legacy mode, then Holiday schedule is defined using Secure
Admin. The Time slot with maximum interval can be set.
4.
Click on Apply
Results
A Holiday Schedule is created. An administrator can define holidays of entire year (one holiday
schedule per holiday). When Observe Holiday parameter is enabled in user template, then
during the defined holidays user is not allowed access. Terminal will deny access to the user.