MorphoAccess® SIGMA Series - Administrator Guide
Threat Level Configurations
2017_2000025464-v03
This document and the information therein are the property of Morpho. They must not
be copied or communicated to a third party without the prior authorization of Morpho
407
July 17
2.
User can change the default settings of GPI to Threat Level Mapping. Select the threat
level corresponding to GPI line 1 and GPI line 0
3.
Click on Save
Figure 338:
Configuring Command Based Threat Level
4.
Select Threat Level Mode as ‘Command based’. If Threat Level is set to Command
Based, the active threat level from the drop-down box has to be set. With Command
Based threat level, the terminal does not refer to TTL lines inputs.
5.
Command based threat level can also be modified using threat level parameters under
Webserver > Complete Configuration and also distant commands.
6.
Select Active Threat Level from dropdown menu
7.
Click on Save