Safran MorphoAccess SIGMA Series Administration Manual Download Page 488

Page: 488 / 517

MorphoAccess® SIGMA Series - Administrator Guide

Compatibility Accessories, Software Licenses and Software Applications

2017_2000025464-v03

This document and the information therein are the property of Morpho. They must not

be copied or communicated to a third party without the prior authorization of Morpho

488

July 17

Compatible software applications

MorphoAccess® SIGMA Family terminals are fully compatible with:



The low level protocol using thrift commands, for more information, please refer to
“Host System Interface Guide”



Morpho Integrator’s Kit (MIK) software development kit (version 6 or later).

Using Legacy Morpho mode, MorphoAccess® SIGMA Family is also compatible with:



MEMS,



MIK 5 or later,

With the following limitations:



Refer to MorphoAccess® 5G Series – Morpho Legacy Mode Limitations document.

Using Legacy L1 mode, MorphoAccess® SIGMA Family is also compatible with:



SecureAdmin(version v4.1.19.0.0.a10.0 or later),

With the following limitations:



Refer to MorphoAccess® 5G Series – Morpho L-1 Bioscrypt Legacy Mode Limitations
document.

Summary of Contents for MorphoAccess SIGMA Series





































































































































































































































































































































































































































































































































Search results

Summary of Contents for MorphoAccess SIGMA Series

Reviews:

Safran MorphoAccess SIGMA Series, Administration Manual, Page: 488 / 517

Search results

Summary of Contents for MorphoAccess SIGMA Series

Reviews: