Home
/
Safran
/
MorphoAccess SIGMA Series
/
Administration Manual

Safran MorphoAccess SIGMA Series, Administration Manual, Page: 320 / 517

Share

Page: 320 / 517

Safran MorphoAccess SIGMA Series Administration Manual Download Page 320

MorphoAccess® SIGMA Series - Administrator Guide

Terminal Configuration through Webserver

2017_2000025464-v03

This document and the information therein are the property of Morpho. They must not

be copied or communicated to a third party without the prior authorization of Morpho

320

July 17

22.

Allow Bio Substitution parameter can be set as ON. It indicates that instead of
Biometric, the user can be authenticated through a substitute such as BIO-PIN or PIN

23.

Press on Enroll User to Enroll the user with the details inputted.

Results

A confirmation message is displayed showing User is enrolled successfully. The user information
is stored in the database.

Whenever user tries to access by providing fingerprint, terminal will match the fingerprint with
the records stored in the database and allow access on successful identification.

Recommendation: In case of authentication failed due to bad biometric, the user can be re-
enrolled. In case of L1 mode, the re-enrolment can be done using Secure Admin station
equipped with a MorphoSmart™ MSO biometric sensor only.

«
...
318
319
320
321
322
...
»

Summary of Contents for MorphoAccess SIGMA Series






































































































































































































































































































































































































































































































































Reviews:

No comments