68
CFIP PhoeniX C Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.0
•
© SAF Tehnika JSC 2013
Figure 51: Access levels setting – GUI page „General / Users”
Each of the three possible login modes has different rights for the system management. The following
Logins and Passwords are default from the production:
Guest
Login with a user name
guest
and a password „blank” (no character, enter only).
In this basic user mode, it is possible to monitor the traffic on the microwave link, monitor the quality
of the frequency tuning, read out the values from the equipment (TxPower, etc.), clear some counters
etc. Up to 3 users in maximum of the Guest level can be logged in the system at the same time.
User
Login with a user name
user
and a password
test.
The User has the same rights as the Guest user extended with the rights to configure and set the
microwave link parameters. Only one user with the rights User can be logged in the device at one
moment. At the same time up to three Guests can be in the system to monitor it.
When the User tries to log on the system and the Administrator is already in the system, an alert
window informs that „The user ADMIN is already logged”. The log in is not performed.
Administrator
Login with a user name
admin
and a password
secret.
The Administrator has the same rights as Guest and User extended with the rights to upload new
firmware in the equipments, control the database of users and change the user names and the
passwords.
Administrator is superior to the User level. When the Administrator tries to log on the system and the
User is already in the system, an alert window asks if the Administrator wants to logout the User,
because there may be logged only one of them at one moment.
LOGIN NAME
– 1-12 characters
PASSWORD
– 1-15 characters
The valid characters are letters, numbers and special symbol “_”. Login names must be different for
