62
CFIP PhoeniX C Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.0
•
© SAF Tehnika JSC 2013
For the standard configuration we recommend to login in the USER mode.
Administrator level is superior to the User level. When the Administrator tries to login the system and
the User is already in the system, an alert window asks if the Administrator wants to logout the User,
because there may be logged only one of them at one moment, see Figure 46.
Figure 46: Alert window about already logged User
The rights and options for each access mode are described in more details in the chapter Access Rights
on page
67.
General system configurations
Protection scheme setting
Availability of „Protection” settings page depends primarily on selected design type and available
license content. See the chapter Advanced system configuration on page 97. When Protected 1+1
design is selected and the same design is supported in license file, then general protection settings are
managed from GUI page „
General / Protection”
(Figure 47).
Figure 47: Initial Protection configuration– GUI page „General / Protection
By default the protection mode is
„off”
after a change into this design. This prevents any possible
