28
EN
HOW TO USE THE MACHINE
ride the machine with the cutting deck in the highest position.
5.4.9 E
ND OF WORK
Stop the machine, put the accelerator lever in the «SLOW» position and turn off the
engine by putting the key into the «OFF» position.
To avoid backfire, put the accelerator in the «SLOW» position
for 20 seconds before stopping the engine.
Always take out the ignition key if leaving the machine unat-
tended!
To keep the battery charged, do not leave the key in the «ON»
position when the engine is not running.
5.4.10 C
LEANING THE MACHINE
After each mowing, clean the outside of the machine, empty the grass-catcher and
shake it to remove residual grass and earth.
Always empty the grass-catcher and do not leave containers
full of cut grass inside a room.
Clean the plastic parts of the body with a damp sponge using water and detergent,
taking care not to wet the engine, the electrical parts or the electronic card located
under the dashboard.
Never use hose-nozzles or harsh detergents for cleaning the
body and engine!
For washing the inside of the cutting deck and the collector channel the machine must
be on firm ground with:
– the grass-catcher or stone-guard fitted;
– the operator seated;
– the engine running;
– the transmission in neutral;
– the blades engaged.
Connect a water hose to each of the pipe fittings
(1) one at a time, and running water through for a
few minutes each, with the blades moving.
IMPORTANT
!
WARNING!
IMPORTANT
!
WARNING!
!
WARNING!
1
