19
EN
CONTROLS AND INSTRUMENTS
4.31 B
RAKE PEDAL
This pedal works the
brake on the rear wheels.
4.32 D
RIVE ENGAGEMENT
PEDAL
This pedal engages drive in
the wheels as well as mod-
ulating the machine's for-
ward and reverse speeds.
– To engage forward drive
just press it in the «F»
direction with your toe-
cap, noting that increas-
ing the pressure on the
pedal progressively
increases the speed of
the machine
– Reverse is engaged by
pressing the pedal with
the heel, in the «R» direc-
tion.
– The pedal automatically
goes into neutral «N»
when released.
– The neutral condition «N» is shown by the lighting of a pilot lamp (4.10.e).
Reverse must only be engaged when the machine is
stopped.
If the drive pedal is used, whether forwards or for reverse, when
the parking brake (4.5) is engaged, the engine stops..
4.33 L
EVER TO RELEASE THE HYDROSTATIC TRANSMISSION
This lever has two positions as shown on the label:
«A»
= Transmission engaged: for all usage conditions, when moving and during
cutting;
«B»
= Transmission released: considerably reduces the effort required for moving
the machine by hand, with the engine turned off.
To avoid damaging the transmission unit, this operation must
be carried out only when the engine has stopped with the pedal (4.32) at position
«N».
IMPORTANT
NOTE
!
WARNING!
4.32
N
F
R
A
B
4.31
4.33
