30
EN
HOW TO USE THE MACHINE
be ascertained and dealt with to avoid re-activating the protection device.
To avoid activating the protection device.
– do not reverse the leads on the battery terminals;
– do not use the machine without its battery or damage may be caused to the
charging regulator;
– be careful to not cause short-circuits.
5.4.13 S
UMMARY OF THE MAIN ACTIONS TO BE CARRIED OUT WHEN USING THE MACHINE
5.5 USING ON SLOPING GROUND
Only mowing in any case on the maximum gradients already mentioned (max 10° -
17%), lawns on a slope have to be mowed moving up and down and never across
IMPORTANT
To ...
Start the engine (
☛
5.4.1)
Go forward (
☛
5.4.2)
Brake or stop (
☛
5.4.3)
Reverse (
☛
5.4.4)
Cut the grass (
☛
5.4.5)
Empty the grass-catcher (
☛
5.4.6)
Unblock the collector channel
(
☛
5.4.7)
End mowing (
☛
5.4.8)
Stop the engine (
☛
5.4.9)
Store the machine (
☛
5.4.10)
You must ...
Open the fuel stopcock, ensure that all the conditions
allowing starting are met, and then turn the key
Move the accelerator;
press the drive pedal forward; (
☛
4.32);
Reduce the engine speed and press the brake pedal
Stop the machine;
press the drive pedal back (
☛
4.32).
Fit the grass-catcher or stone-guard, adjust the height of
the cutting deck wheels and move the accelerator;
press the drive pedal forward; (
☛
4.32);
engage the blades and adjust the cutting height.
Stop forward movement, disengage the blades, and move
the lever for tipping up the grass-catcher.
Stop forward movement, disengage the blades and turn
off the engine; remove the grass-catcher and clean the
channel.
Disengage the blades and reduce the engine speed.
Reduce the engine speed, wait a few seconds, turn the
key.
Engage the parking brake, remove the key and, if neces-
sary, wash the machine, the inside of the cutting deck,
the collector channel and the grass-catcher.