Runco D-73d Ultra, Installation & Operation Manual

Page: 80 / 152

Installation
64 D-73d Series Installation/Operation Manual
Corner/Midpoint Alignment — Cinema (2.35:1) Aspect Ratio:
1. Select the Cinema aspect ratio using either the Dimension Digital Controller
remote control unit (see Figure 2-6) or the OSD menu (press MENU , then select
Aspect Ratio -> Cinema ). This should move the anamorphic lenses back into the
optical path, in front of the primary lenses.
2. On the Dimension Digital Controller remote control or front panel, press MENU .
3. Select Calibration from the Main Menu.
4. Select Image Alignment from the Calibration Menu.
5. Select Corner Alignment to correct a “keystoned” image by adjusting the image
corner positions. Select Midpoint Alignment to correct pincushion distortion by
adjusting the image edge mid-points. See Figure 3-29.
Corner/Midpoint Alignment — Other Aspect Ratios:
The Dimension Digital Controller saves the Image Alignment (warp) settings for each
aspect ratio. To program additional aspect ratios, select each one and use the controls
in the
Corner Alignment and Midpoint Alignment menus. Or, select
Calibration -> Copy/Paste -> Aspect Ratio -> Copy Settings , select a different
aspect ratio and choose Paste Settings .