Runco D-73d Ultra, Installation & Operation Manual

Page: 96 / 152

Operation
80 D-73d Series Installation/Operation Manual
Information Signal / System: Select Information from the Main Menu, then choose either Signal or
System to display information about the current input signal (resolution, frequency, type
et cetera) and installed firmware versions, as well as other information that uniquely
identifies your Dimension Digital Controller and display device.
Should you ever need to contact Runco Technical Support, this information will help
them answer your questions or resolve product performance issues.
Network: Select Information from the Main Menu, then choose Network to display
information about the Ethernet network connection.
To enable network communication via Ethernet, refer to IP Configuration on page 93.
Field Service / Manufacturing: The Field Service and Manufacturing menus are
password-protected and intended for use only by Runco service personnel and factory
technicians.
Information
Signal
System
Network
Field Service
Manufacturing
➤
Signal
Input Source HDMI 1
Signal Format 1080p/60
Input Resolution 1920x1080
Vertical Freq 59.94 Hz
Horizontal Freq 67.500 kHz
Pixel Clock 148.500 MHz
Color Space REC709
Sync Type Separate
3D Mode Auto
Memory Preset ISF Night
System
Model DC-300
Display Name D-73d
Output Resolution 1920x1080
Primary Serial
Number
00000000
Serial Number 00000000
Boot Version 4.0
Firmware Version 4.0
Micro Version 4.0
BAE Serial Number 12345678
BAE Boot Version 1.0
BAE Firmware
Version
1.0
Network
MAC Address
1A:2B:3C:4D:5E:6
F
IP Address 192.168.0.150
Subnet Mask 255.255.0.0
Default
Gateway
192.168.1.1
DHCP Enabled
Network Status Connected