Runco D-73d Ultra, Installation & Operation Manual

Page: 129 / 152

External Control
D-73d Series Installation/Operation Manual 113
Noise Filter NFL R/W Yes 0 10 No
Noise Filter Offset NFO R/W Yes 0 10 No
Orientation ORI R/W No 0 4 No 0 = Floor Front
1 = Ceiling Front
2 = Floor Rear
3 = Ceiling Rear
4 = Auto
OSD Position Horizontal OSD R/W Yes 0 100 No
Output Shift Height OSH R/W Yes -50 0 No
Output Shift Left Right OSL R/W Yes -300 300 No
OSD Message Enable OSM R/W No 0 1 No 0 = Off; 1 = On
OSD Timer OST R/W Yes 0 60 No Values from 1-4 are not allowed;
if increment or decrement is
used, these values will be
skipped.
Output Shift Up Down OSU R/W Yes -200 200 No
OSD Position Vertical OSV R/W Yes 0 100 No
Output Shift Width OSW R/W Yes -50 0 No
Overscan Mode OVM R/W No 0 1 No 0 = Zoom
1 = Crop
Overscan OVS R/W Yes 0 20 No
PCE Blue Hue PHB R/W Yes -100 100 No
PCE Cyan Hue PHC R/W Yes -100 100 No
PCE Green Hue PHG R/W Yes -100 100 No
PCE Magenta Hue PHM R/W Yes -100 100 No
PCE Red Hue PHR R/W Yes -100 100 No
Phase PHS R/W Yes 0 31 No
PCE Yellow Hue PHY R/W Yes -100 100 No
PCE Blue Level PLB R/W Yes -100 100 No
PCE Cyan Level PLC R/W Yes -100 100 No
PCE Green Level PLG R/W Yes -100 100 No
PCE Magenta Level PLM R/W Yes -100 100 No
PCE Red Level PLR R/W Yes -100 100 No
PCE Yellow Level PLY R/W Yes -100 100 No
Periodic Notification Enable PNE R/W No 0 1 No 0 = Off; 1 = On
Table 6-1. Serial Commands (continued)
Setting
Command
Code
Read/
Write
Inc/
Dec
Min
Value
Max
Value
String? Notes