
Installation
38
D-73d Series Installation/Operation Manual
3.7
System
Interconnections
Proceed as follows to connect the D-73d system components to each other and to AC
power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• For best performance and to minimize cable clutter, use high-quality cables that are
only as long as necessary to connect two devices. (Don’t use a 20-foot cable when a
6-foot cable will suffice.)
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
Connecting the Dimension
Digital Controller to the
D-73d Projector
Digital Video Connection:
Connect the
HDMI Out To Pri. Display
connector on the
Dimension Digital Controller to the HDMI input on the “left eye” (top) optical engine on
the D-73d projector. Similarly, connect the
HDMI Out To Sec. Display
connector on the
Dimension Digital Controller to the HDMI input on the “right eye” (bottom) optical engine
on the D-73d projector.
RS-232 Connection:
Connect the
Pri. Display Control
output from the Dimension
Digital Controller to the RS-232 input on the “left eye” (top) optical engine on the D-73d
projector.
Similarly, connect the
Sec. Display Control
output from the Dimension Digital
Controller to the RS-232 input on the “right eye” (bottom) optical engine on the D-73d
projector.
Use the provided modular telephone cables with RJ11 plugs at both ends for the
RS-232 connections. These cables have color-coded labels at each end to facilitate
these connections. On the D-73d end, use the provided RJ11-to-DB9 adapters. These
adapters are wired as shown in Figure 3-13.
Figure 3-13. RS-232 Connection from the Dimension Digital Controller to the
D-73d
➤
3
4
XMT DATA
2
3
RCV DATA
2
5
SIG GND
NO CONNECTION
1, 5, 6
1, 4, 6,
7, 8, 9
To/From
Dimension
Digital
Controller
6-position
RJ11 Male
DB9 Male
6
1
1
6
RCV DATA
XMT DATA
RS-232
RS-232
Summary of Contents for D-73d Ultra
