RDC6445GT5 Laser cutting system hardware user manualV1.1
深圳市睿达科技有限公司
39
After modifying the time, press the OK key to modify the time, and cancel to return to the upper
interface. When the system is in an encrypted state, the time can not be modified.
Multi-positioning point settings
When pressing the “Position settings” button, the following interface will pop up:
Figure 8.5.1-4
Figure 8.5.1-5
The multi-positioning point enable at the top of the screen is used as the main switch to turn off or turn
on the multi-positioning point function. When it is disabled, it is a single positioning point state. After
enabling the multi-positioning point function, it is in multi-positioning point state.
In multi-positioning state, there are four positioning points in total. The method of setting the
positioning point coordinates is as follows:
Set by coordinate marking box:
1.Select the positioning point button to be set, and the position point 1 is selected in the figure.
