RDC6445GT5 Laser cutting system hardware user manualV1.1
深圳市睿达科技有限公司
30
Figure 8.2.2-2
Parameters can be modified at this time, after modification, press the “OK” key to confirm the
modification and return or press the “ESC” key to cancel the modification and return to the
previous interface, and finally press the “OK” key to return to the main interface.
8.2.3 Power settings
Click “Power parameters” in the main interface, and the following interface will pop up:
Figure 8.2.3
The maximum and minimum power of Laser 1 can be set at this time. Click “More” to set the
maximum and minimum power of Laser 2. The parameter setting method is the same as above.
8.3 File parameters
Click “File name” in the main interface, and the following interface will pop up:
