RDC6445GT5 Laser cutting system hardware user manualV1.1
深圳市睿达科技有限公司
29
Start: start processing.
Stop: stop processing.
Keyboard lock: when clicking on the system time area, the interface will be locked,
and the icon
will be displayed on the screen. Clicking it the again to unlock successfully.
Network connection status: when the system is connected to the network cable, the
icon
will be displayed on the screen.
Position mark: it will be displayed after clicking it in the manual interface
Screen origin position: The graph display area takes this coordinate point as a
reference for depicting.
8.2. Speed settings
Click “Speed parameters” in the main interface, and the following interface will pop up:
Figure 8.2.2-1
When the system is idle, the speed parameters are manual high speed and manual low speed,
which respectively represent the maximum and minimum speed of the manual motion shaft, which
is convenient for debugging; when the system is running or paused, this speed parameter is
processing speed, indicating the current file processing speed. The parameter setting method is as
follows:
Click the parameter box to pop up the numeric keyboard, as shown in the figure below:
